Filter Housing (Materials)

• Head: Anodised Aluminium
• Housing: Anodised Aluminium
• Bypass Valve: Anodised Aluminium

Pressure

• Working Pressure: 30 bar (3 MPa)
• Test Pressure: 45 bar (4.5 MPa)
• Burst Pressure: 120 bar (12 MPa)
• Pulsed Pressure Fatigue Test: 1,000,000 cycles with pressure from 0 to 30 bar (3 MPa)

Temperature

• From -25°C to +110°C

Bypass Valve

• Opening Pressure: 3.5 bar ±10%
• Other opening pressures available on request

AP Filter Elements

• Series N and W Elements: 20 bar
• Oil flow from exterior to interior.

Seals

• Standard: NBR series A
• Optional: FPM series V

Weights (kg)

• LMP950.2: 25.1
• LMP950.3: 33.5

Volumes (dm³)

• LMP950.2: 15
• LMP950.3: 28

Connections

• In-line Inlet/Outlet: LMP 950
• 90° Inlet/Outlet: LMP 951

Compatibility

• Housings Compatible With:
  • Mineral oils to ISO 2943
  • Aqueous emulsions
  • Synthetic fluids
  • Water and glycol
• Filter Elements Compatible With:
  • Mineral oils to ISO 2943
  • Synthetic fluids
  • Aqueous emulsions
  • Water and glycol (series W required)
• NBR Seals Series A Compatible With:
  • Mineral oils to ISO 2943
  • Aqueous emulsions
  • Synthetic fluids
  • Water and glycol
• V Series FPM Seals Compatible With:
  • Synthetic fluids type HS-HFDR-HFDS-HFDU to ISO 2943

Filter Element Area

• Filter Element in Stainless Steel Mesh
  • Length:
    • Type 2: 10,950 cm²
    • Type 3: 25,100 cm²

Filter Housing ΔP Pressure Drop

The curves are plotted utilising mineral oil with a density of 0.86 kg/dm³ to ISO 3968. ΔP varies proportionally with density.

Recommended Maximum Flow Rate

• For filters installed on lubrication lines, return or in-line filters, the maximum flow rate is defined by the oil maximum velocity in the connections.
• Maximum Oil Velocity:
  • Pressurised lubrication filter: 2.5 m/sec
  • Return or in-line filter: 5 m/sec